3D printed cigar accessories

Started by calvarez, 03/19/2013 05:57 PM

Previous topic - Next topic

calvarez

When you own a 3D printer, you're always looking for excuses to use it...


Carlos Alvarez, Peoria, AZ

"I've learned that the taboo subjects -- religion, politics,
philosophy -- can be safely discussed in polite company
when you're holding a fine cigar and a scotch."
  -- Me

CrazyK

You actually own one? That is too cool, I would love to get one myself!
CrazyK
--------------------------
Simia demulcta mitis

calvarez

It's an interesting, but often frustrating toy.  It's nothing like plug and play or just design and print.  I have more molten blobs than useful things.  It's in pieces getting some upgrades right now.
Carlos Alvarez, Peoria, AZ

"I've learned that the taboo subjects -- religion, politics,
philosophy -- can be safely discussed in polite company
when you're holding a fine cigar and a scotch."
  -- Me

Ken Kelley

Do they all come with the three little UFO's?
Guru of Benign Curmudgeonliness, Imperfect Patience, and Reluctant Toleration.



calvarez

Oh, and the tubes are useful and work well for a corona or smaller.  I just used someone else's design file for it.  The cutter takes a utility blade, and cuts, but not anywhere as cleanly as a good cutter.  I've been using it as a cut-off tool if I need to stop smoking but want to save the cigar.  It's not precise enough for regular cutting, and besides I only use a V cutter.
Carlos Alvarez, Peoria, AZ

"I've learned that the taboo subjects -- religion, politics,
philosophy -- can be safely discussed in polite company
when you're holding a fine cigar and a scotch."
  -- Me

calvarez

QuoteAlphairon - 3/19/2013  3:23 PM

Do they all come with the three little UFO's?

LOL.  Man, that took me a while.  "WTF is he talking about??"  Ooooooh....
Carlos Alvarez, Peoria, AZ

"I've learned that the taboo subjects -- religion, politics,
philosophy -- can be safely discussed in polite company
when you're holding a fine cigar and a scotch."
  -- Me

Ken Kelley

#6
Quotecalvarez - 3/19/2013  7:24 PM

QuoteAlphairon - 3/19/2013  3:23 PM

Do they all come with the three little UFO's?

LOL.  Man, that took me a while.  "WTF is he talking about??"  Ooooooh....


Well? You haven't answered the question yet!  :biggrin:


Now really...is this just a big toy or do you have a real purpose for it other than just to have?
Guru of Benign Curmudgeonliness, Imperfect Patience, and Reluctant Toleration.



Chrism305

I was told today that some enlightened wealthy person has decided that my school needed one of these things. I raised my hand and asked why my tiny little high school would ever need it, there has to be better ways to use the money. I was told that they are donating the machine and money for training, even if noone uses it and it just sits on a shelf in the closet. Maybe the Art teacher could use it. If I had known that I could print humidors with it I would have been much more supportive. I hope they donate lots of materials for me to "test out" the machine.

calvarez

Go to http://www.thingiverse.com and get yourself some print files.  If it's a higher-end model it will be quite a bit easier.  And get in on the training!

Any idea what model or type?
Carlos Alvarez, Peoria, AZ

"I've learned that the taboo subjects -- religion, politics,
philosophy -- can be safely discussed in polite company
when you're holding a fine cigar and a scotch."
  -- Me

Chrism305

No but I think they were intent on moving things along fairly quickly.

pferg

wow ive been looking at 3D printing and its really cool. I wish i had that when i was in school for architecture, all the building modeling wouldve been so much simpler.

dala399

Very impressive, I would have so much fun with one off these.
-David

Samhain2000

There is a group trying to perfect a printable lower for the M-4 assult rifle. The last I read the tests fired but they crackes after a few rounds.
A cigar is like a gun, you never know when you'll need one.

Ken Kelley

QuoteSamhain2000 - 3/20/2013  1:39 AM

There is a group trying to perfect a printable lower for the M-4 assult rifle. The last I read the tests fired but they crackes after a few rounds.


The latest version of the printed AR lower lasted 650 rounds so they're getting better.
Guru of Benign Curmudgeonliness, Imperfect Patience, and Reluctant Toleration.



Samhain2000

Wow, I did not know that.
A friend of mine is excited about this printable lower.
I reminded him, you still need to buy all the internal parts to make it go boom.
A cigar is like a gun, you never know when you'll need one.

calvarez

Yeah, I've been watching the progress on gun printing.  As a rabid libertarian I think it's critical for us to get back rights and abilities like creating our own firearms outside of the government-controlled system.

Watch for legislation to start hitting as soon as they figure out that 3D printing empowers the people, however.
Carlos Alvarez, Peoria, AZ

"I've learned that the taboo subjects -- religion, politics,
philosophy -- can be safely discussed in polite company
when you're holding a fine cigar and a scotch."
  -- Me

BFry Cigar Guy

3D printing....mind blown, way cool to be able to have this technology.  :rocker:
Ben


   
Privacy Policy     Terms of Service
Copyright © 2007-2024 Cigar Geeks, Inc. All rights reserved.