|
|
 Veteran
Joined: 12/19/2013
Posts: 209
 
Points: 464
      Feedback Rating: 17 Badges:
| I've been seriously considering condensing my three large desktops to a wineador. I know there's a few threads on here discussing wineadors but I would like to know if anyone has this particular model. Likes/dislikes? I'm concerned about long-term aging. I know this is a slippery slope. I've had a cabinet before and lets just things got a little out of hand….
Here's the model that I'm considering. The only mod I would do is flip the drawers to the top.
http://www.newair.com/products/cc-280e/ |
|
|
|
 Elite Expert
Joined: 7/1/2014
Posts: 4235
    
Points: 8640
      Feedback Rating: 147 Location: Minneapolis, MNBadges:
| I think if you purchase one of those already built they can be very expensive. You can get a scratch and dent fairly cheap here http://www.air-n-water.com/product/aw-281e-bl.htm You just have to check often until one is in stock. I've seen sets of drawers run about $200-250. This would be the downside of not buying a pre built unit, you'll have to find someone to do the drawers. http://www.wineadors.com/newair.html has them but I've heard the wait time can be really long.
All that said, I don't have one...yet. Living in Minnesota the temps aren't really an issue so using a couple tupperdors works fine for me. Would be nice to have something like a wineador for looks and keeping everything together and organized. |
|
|
|
 Elite Veteran
Joined: 8/9/2014
Posts: 760
    
Points: 1410
     Feedback Rating: 39 Location: MassachusettsBadges:
| I have that particular model, I use kitty litter, it works really well. I got it from Air-n-water and if you google ain & water coupon you'll usually find one you can use for 30% off. That puts it in the $300-$350 range, which is a pretty good deal if you ask me. The capacity isn't as big as I'd like once you get enough KL to make it work so I'm buying another one. I got some inexpensive spanish cedar trays from cheaphumidors.com to put on two of the shelves for singles. They fit nicely and look good, too. Hope that helps! |
|
|
|
 Veteran
Joined: 12/19/2013
Posts: 209
 
Points: 464
      Feedback Rating: 17 Badges:
| SparklePony - 1/10/2015 7:53 PM
I have that particular model, I use kitty litter, it works really well. I got it from Air-n-water and if you google ain & water coupon you'll usually find one you can use for 30% off. That puts it in the $300-$350 range, which is a pretty good deal if you ask me. The capacity isn't as big as I'd like once you get enough KL to make it work so I'm buying another one. I got some inexpensive spanish cedar trays from cheaphumidors.com to put on two of the shelves for singles. They fit nicely and look good, too. Hope that helps!
That was GREAT info from BOTH of you geeks. By using the coupon code I can get a 281e for $189 and get the shelves and drawers I want and stay under $300!!!! |
|
|
|
 Extreme Expert
Joined: 6/8/2013
Posts: 2846
     
Points: 4961
         Feedback Rating: 35 Location: Honeyville, UtahBadges:
| Under 300 is a great price. I might have to look into that as well. |
|
|
|
 Veteran
Joined: 12/19/2013
Posts: 209
 
Points: 464
      Feedback Rating: 17 Badges:
| I pulled the trigger. It's all over but the waiting now. Camshaft83 heres the link for the code.
http://www.retailmenot.com/view/air-n-water.com?c=6545612 |
|
|
|
 Elite Expert
Joined: 10/25/2011
Posts: 4954
        
Points: 5914
      Feedback Rating: 50 Location: Montreal, QuebecBadges:
|  |
|
|
|
 Elite Veteran
Joined: 8/9/2014
Posts: 760
    
Points: 1410
     Feedback Rating: 39 Location: MassachusettsBadges:
| Awesome! Where are you getting the shelves and drawers if you don't mind me asking? |
|
|
|
 Veteran
Joined: 12/19/2013
Posts: 209
 
Points: 464
      Feedback Rating: 17 Badges:
| SparklePony - 1/11/2015 4:39 PM
Awesome! Where are you getting the shelves and drawers if you don't mind me asking?
I'm still working on that part. I'm looking at wineadors.com and there's guy that's highly recommended on another cigar forum. I'm open to any and all options. |
|
|
|
 Elite Veteran
Joined: 8/9/2014
Posts: 760
    
Points: 1410
     Feedback Rating: 39 Location: MassachusettsBadges:
| Just so you know, I think he's the one that makes them for the cc-280-e. Since he's often very slow with his turnaround, I chose to just get them already made and make the best of it. However, if you really want custom, you've figured out the exact way to go. |
|
|
|
 Veteran
Joined: 12/19/2013
Posts: 209
 
Points: 464
      Feedback Rating: 17 Badges:
| Yeh, he said 4- 6 weeks which is cool for me. Still waiting on my cooler to ship. Then I have to season it and all that other stuff. Everything is ordered but the beads. Too early to get excited. |
|
|
|
 Extreme Expert
Joined: 1/3/2014
Posts: 3262
     
Points: 5142
   Feedback Rating: 112 Badges:
| williegstyles - 1/11/2015 7:49 PM
SparklePony - 1/11/2015 4:39 PM
Awesome! Where are you getting the shelves and drawers if you don't mind me asking?
I'm still working on that part. I'm looking at wineadors.com and there's guy that's highly recommended on another cigar forum. I'm open to any and all options.
I had my shelves made by Forrest at wineadors.com....he does good work but slow as all get out, and after your payment you won't get any email updates or anything from him. It took all of 6-7 weeks to get my shopping info email and another 4/5 days to get goods so it was actually about 8 weeks total. Again he does real nice work but the lack of communication was kinda unprofessional IMO. If you are good with just ordering, paying, and waiting then it's not a big deal. 6 weeks hit and I started sending emails and never heard back from him until they showed up. So don't be surprised if the same happens to you. I did some research before I used him as well and from what I could tell is that he's always delivered the goods and never ripped anybody off, just very slow and doesn't communicate after you get the order placed and payment sent.
Anyways just from my experience thought I would share with you. All in all I like the wineador but I spent more on that then I would've another table humidor & looking back Id rather have another table. The wineador IMO is only worth it if you can do it on the cheap or really really need the climate control. Good luck tho my friend! |
|
|
|
 Veteran
Joined: 12/19/2013
Posts: 209
 
Points: 464
      Feedback Rating: 17 Badges:
| BewareDaPenguin - 1/12/2015 7:51 PM
williegstyles - 1/11/2015 7:49 PM
SparklePony - 1/11/2015 4:39 PM
Awesome! Where are you getting the shelves and drawers if you don't mind me asking?
I'm still working on that part. I'm looking at wineadors.com and there's guy that's highly recommended on another cigar forum. I'm open to any and all options.
I had my shelves made by Forrest at wineadors.com....he does good work but slow as all get out, and after your payment you won't get any email updates or anything from him. It took all of 6-7 weeks to get my shopping info email and another 4/5 days to get goods so it was actually about 8 weeks total. Again he does real nice work but the lack of communication was kinda unprofessional IMO. If you are good with just ordering, paying, and waiting then it's not a big deal. 6 weeks hit and I started sending emails and never heard back from him until they showed up. So don't be surprised if the same happens to you. I did some research before I used him as well and from what I could tell is that he's always delivered the goods and never ripped anybody off, just very slow and doesn't communicate after you get the order placed and payment sent.
Anyways just from my experience thought I would share with you. All in all I like the wineador but I spent more on that then I would've another table humidor & looking back Id rather have another table. The wineador IMO is only worth it if you can do it on the cheap or really really need the climate control. Good luck tho my friend!
Thats great info. I did order from Forest. I was shocked because I sent an email last night with a few questions expecting to get a response sometime today. I received a response within 30 minutes. However, that was before I had made payment. I will keep a close eye the level of communication. I'm not sure when you placed your order but sometime in Sept/Oct he lost his 2 year old grandson to a sudden death. He wrote about it on his website.
Living in Texas where we have summer 10.5 months out of the year climate control is crucial. |
|
|
|
 Guru
Joined: 1/23/2009
Posts: 6278
      
Points: 14958
           Feedback Rating: 52 Location: Republic of Korea (aka South Korea)Badges:
|
BewareDaPenguin - 1/13/2015 10:51 AM . The wineador IMO is only worth it if you can do it on the cheap or really really need the climate control. Good luck tho my friend! ^^ This. Even the climate control isn't that good (at least on my Tempstar clone) because the built-in peltier cooler can't keep up with any real heat. It works fine if your home is already air conditioned, but if you live in a house that the indoor temp gets into the 90s, the coolidor can't keep up. On top of that, the vinodor will have condensation that you can either let drain out the drain hole, or collect in a container at the bottom of the fridge (on the inside). Gotta keep this container drained and clean or it will develop mold. I have mine outfitted with computer fans with built in blue LEDs, I ran the power for these through the drain hole in the bottom of the vinodor, then sealed it off with vinyl tape. It looks impressive, but to be honest my coleman coolerdor is much better for cigar storage. |
|
|
|
 Veteran
Joined: 12/19/2013
Posts: 209
 
Points: 464
      Feedback Rating: 17 Badges:
| It's starting to sound like I may be creating a monster!!! I like the idea of computer fans. Would you mind taking a pic of yours and sending it to me? |
|
|
|
 Veteran
Joined: 12/19/2013
Posts: 209
 
Points: 464
      Feedback Rating: 17 Badges:
| She's here… |
|
|
|
 Guru
Joined: 1/23/2009
Posts: 6278
      
Points: 14958
           Feedback Rating: 52 Location: Republic of Korea (aka South Korea)Badges:
| Sorry I was slow to respond to your question about pics...let me see what I can come up with. |
|
|
|
 Guru
Joined: 1/23/2009
Posts: 6278
      
Points: 14958
           Feedback Rating: 52 Location: Republic of Korea (aka South Korea)Badges:
|
Not sure if this is want you wanted to see, or do you want to see how it's wired? Basically I'm using a 12v power supply (uses 110v AC and coverts it to 12v DC) routed through the drain hole. I had to cut off the 12 v connector (a coaxial plug) and spliced in a standard computer power "Y" cable to feed power to the fans. Sorry, editor is not working, but the image is in the link below. http://cigargeeks.com/community/forums/thread-view.asp?tid=2701&posts=36&mid=45416&highlight=%22pc+fans%22&highlightmode=1&action=search#M45416 |
|
|